East Coast Enduro Association: Ktm 300 Complete Topend For Sale! 250/300 Conversion! - East Coast Enduro Association

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • This topic is locked

Ktm 300 Complete Topend For Sale! 250/300 Conversion! INCLUDES HEAD, CYLINDER & POWERVALVE ASM.

#1 User is offline   SCOTT SIEGMEISTER 

  • Junior Member
  • PipPipPipPipPipPipPipPip
  • Group: ECEA - Club Member
  • Posts: 759
  • Joined: 31-August 01
  • Gender:Male
  • Interests:MOTORCYCLES,SKIING,FISHING AND GUNS

Posted 04 November 2009 - 08:53 PM

Hi, I am selling a 300 EXC complete top end. I bought this to convert my 2006 250 XCW to a 300. I was just about to send the cylinder out to have it replated and have a piston matched to it and then I bought a 2008 300 XCW.

So I thought I would post it here first to see if any one was interested.

I verified with KTM USA that it will fit model years from 2004 to 2008, it is plug and play! The only thing that is missing is the power valve covers.

I am asking $375 plus shipping. These are selling USED from $550 to $850 as we speak. Thanks for looking!

P.S. I have other 250/300 parts for sale. I have a set of used 2008 front and rear stock rotors asking $110 plus shipping, a few FMF Turbine Core II's, some EE Skid Plates. I am looking for some parts, maybe we can barter!

Regards,

Scott
0

#2 User is offline   mike walters 

  • "Has too much time at work to surf the Internet"
  • PipPipPipPipPipPipPipPip
  • Group: Members
  • Posts: 1,275
  • Joined: 09-November 06
  • Gender:Male
  • Location:Malverne New York
  • Interests:Sociology

Posted 05 November 2009 - 05:24 AM

QUOTE (SCOTT SIEGMEISTER @ Nov 4 2009, 09:53 PM) <{POST_SNAPBACK}>
Hi, I am selling a 300 EXC complete top end. I bought this to convert my 2006 250 XCW to a 300. I was just about to send the cylinder out to have it replated and have a piston matched to it and then I bought a 2008 300 XCW.

So I thought I would post it here first to see if any one was interested.

I verified with KTM USA that it will fit model years from 2004 to 2008, it is plug and play! The only thing that is missing is the power valve covers.

I am asking $375 plus shipping. These are selling USED from $550 to $850 as we speak. Thanks for looking!

P.S. I have other 250/300 parts for sale. I have a set of used 2008 front and rear stock rotors asking $110 plus shipping, a few FMF Turbine Core II's, some EE Skid Plates. I am looking for some parts, maybe we can barter!

Regards,

Scott


Scott: Is the 300 cylinder a brand new 06 unit?

0

#3 User is offline   SCOTT SIEGMEISTER 

  • Junior Member
  • PipPipPipPipPipPipPipPip
  • Group: ECEA - Club Member
  • Posts: 759
  • Joined: 31-August 01
  • Gender:Male
  • Interests:MOTORCYCLES,SKIING,FISHING AND GUNS

Posted 05 November 2009 - 09:44 PM

Hi Mike, how are you?

It is not a brand new cylinder. It is a 05 250 EXC complete topend with powervalve. It has the powervalve pin welded also. These tend to fall out and ruin the motor, that is why it is welded.

I bought this to convert my 2006 250 XCW into a 300. He told me it came off of a running bike. I was just about to send it out to get it replated and a piston match to it. Then I ended up buying a 2008 XCW and I am going to sell my 2006 and the top end to.

The plating is worn off of the exhaust side of the cylinder, my sons RM 65 cylinder looked the same right before I sent it out to get replated, the bike had a lot of compression.

I just wanted to start with a new topend.

Regards,

Scott
0

#4 User is offline   Tyler McCreight 

  • Junior Member
  • PipPipPipPip
  • Group: Members
  • Posts: 66
  • Joined: 15-September 03
  • Location:Brownstown PA
  • Interests:riding and racing

Posted 06 November 2009 - 03:29 PM

If you will sell the rear rotor separate let me know. Thanks
Tyler
717-405-7357
0

#5 User is offline   John Yantek 

  • Board Newbie
  • Pip
  • Group: Members
  • Posts: 23
  • Joined: 08-November 04

Posted 07 November 2009 - 06:55 AM

Did you sell the bike yet? I'm looking for a 250 around that year.
0

#6 User is offline   SCOTT SIEGMEISTER 

  • Junior Member
  • PipPipPipPipPipPipPipPip
  • Group: ECEA - Club Member
  • Posts: 759
  • Joined: 31-August 01
  • Gender:Male
  • Interests:MOTORCYCLES,SKIING,FISHING AND GUNS

Posted 07 November 2009 - 10:33 AM

Hi John, yes the bike is available. I am going to post the bike for sale today here on the ECEA and KTM Talk. I haven't had the chance to get it ready until yesterday and have to take pictures later today after two soccer games.

Give me a call 201-274-6274 and I can give you the low down on the bike. Thanks,

Scott

QUOTE (John Yantek @ Nov 7 2009, 12:55 PM) <{POST_SNAPBACK}>
Did you sell the bike yet? I'm looking for a 250 around that year.


0

#7 User is offline   Tyler McCreight 

  • Junior Member
  • PipPipPipPip
  • Group: Members
  • Posts: 66
  • Joined: 15-September 03
  • Location:Brownstown PA
  • Interests:riding and racing

Posted 10 November 2009 - 03:05 PM

Scott,
I pm'ed you my address for shipping cost on the rotor. Did you get it? Thanks
0

#8 User is offline   SCOTT SIEGMEISTER 

  • Junior Member
  • PipPipPipPipPipPipPipPip
  • Group: ECEA - Club Member
  • Posts: 759
  • Joined: 31-August 01
  • Gender:Male
  • Interests:MOTORCYCLES,SKIING,FISHING AND GUNS

Posted 15 November 2009 - 07:51 PM

$325.00 anyone?
QUOTE (Tyler McCreight @ Nov 10 2009, 09:05 PM) <{POST_SNAPBACK}>
Scott,
I pm'ed you my address for shipping cost on the rotor. Did you get it? Thanks


0

#9 User is offline   Tyler McCreight 

  • Junior Member
  • PipPipPipPip
  • Group: Members
  • Posts: 66
  • Joined: 15-September 03
  • Location:Brownstown PA
  • Interests:riding and racing

Posted 19 November 2009 - 12:21 PM

Scott,
Bought another rotor so don't worry about finding shipping cost.
0

#10 User is offline   SCOTT SIEGMEISTER 

  • Junior Member
  • PipPipPipPipPipPipPipPip
  • Group: ECEA - Club Member
  • Posts: 759
  • Joined: 31-August 01
  • Gender:Male
  • Interests:MOTORCYCLES,SKIING,FISHING AND GUNS

Posted 19 November 2009 - 01:13 PM

Hi Tyler, I am very sorry that I couldn't get back to you with the shipping, things have been very busy!

Best of luck to you.

Regards,

Scott
QUOTE (Tyler McCreight @ Nov 19 2009, 06:21 PM) <{POST_SNAPBACK}>
Scott,
Bought another rotor so don't worry about finding shipping cost.


0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • This topic is locked

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users