East Coast Enduro Association: WTB - fork and shock springs - East Coast Enduro Association

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • This topic is locked

WTB - fork and shock springs .44 kg/mm 48mm KYB / 5.4 Ohlins

#1 User is offline   Glenn Plokhoy 

  • Junior Member
  • PipPipPipPipPip
  • Group: ECEA Member
  • Posts: 186
  • Joined: 02-September 01
  • Gender:Male

Posted 28 February 2012 - 10:49 PM

I need the springs for the 48mm CC fork like on the YZ/YZF, 44mm x 450mm.

Ohlins 5.4 rear spring. Thanks.
0

#2 User is offline   Bobby Kitchen 

  • Board VIP
  • PipPipPipPipPip
  • Group: Valley Forge Trail Riders
  • Posts: 160
  • Joined: 07-January 10
  • Gender:Male

Posted 01 March 2012 - 07:23 AM

View PostGlenn Plokhoy, on 28 February 2012 - 10:49 PM, said:

I need the springs for the 48mm CC fork like on the YZ/YZF, 44mm x 450mm.

Ohlins 5.4 rear spring. Thanks.


Glenn,
You should contact Evan Yarnall (484-593-0095) at Solid Performance. I don't want to speak for him but I'm sure he can help you in your search. I know he is a certified Ohlins dealer\rep with a fairly large inventory.

Thanks,
Bobby



0

#3 User is offline   Glenn Plokhoy 

  • Junior Member
  • PipPipPipPipPip
  • Group: ECEA Member
  • Posts: 186
  • Joined: 02-September 01
  • Gender:Male

Posted 01 March 2012 - 02:05 PM

Bobby,

Yeah I'm sure Evan could get me new springs, I could get them from a number of sources. Just looking to see if anyone here has something on a shelf somewhere before I pop for new stuff. These will be for my '12 GasGas EC250R when it arrives soon. The new Marzocchi 48 CC fork uses the KYB springs.

Glenn
0

#4 User is offline   Mike Soudas 

  • Senior Member
  • PipPipPipPipPipPipPipPip
  • Group: Admin
  • Posts: 3,684
  • Joined: 27-August 01
  • Gender:Male
  • Location:Dupont, Pa
  • Interests:Motorcycles, Engineering, Auto Painting, ECEA

Posted 01 March 2012 - 02:50 PM

I have a set of 4.5 from the 50mm zookes that come on a TM, they are 15mm in length difference but the 50's have staggered internal preload and factory came this way.. We have another set coming on Monday but unsure of the rate..?
also I have a 5.0 rear ohlins or YZ and either a 5.4 or 5.6 coming in on Saturday.
0

#5 User is offline   Evan Yarnall 

  • Board Charter Member
  • PipPipPipPip
  • Group: Valley Forge Trail Riders
  • Posts: 66
  • Joined: 06-June 08
  • Gender:Male
  • Location:West Chester, PA

Posted 05 March 2012 - 09:14 PM

View PostGlenn Plokhoy, on 28 February 2012 - 10:49 PM, said:

I need the springs for the 48mm CC fork like on the YZ/YZF, 44mm x 450mm.

Ohlins 5.4 rear spring. Thanks.


Glen, the measurements you gave for the fork springs for the new Zokes are a bit short, though you could space them up it would be over 25mm of spacers.

I have both fork and shock springs in stock for the Marzocchi 48 Shiver & Ohlins 888. I usually give good deals to ECEA racers, if you need them call the shop.

Happy trails.

-Evan @ SP
484.393.0095
0

#6 User is offline   Glenn Plokhoy 

  • Junior Member
  • PipPipPipPipPip
  • Group: ECEA Member
  • Posts: 186
  • Joined: 02-September 01
  • Gender:Male

Posted 05 March 2012 - 11:03 PM

View PostEvan Yarnall, on 05 March 2012 - 09:14 PM, said:

View PostGlenn Plokhoy, on 28 February 2012 - 10:49 PM, said:

I need the springs for the 48mm CC fork like on the YZ/YZF, 44mm x 450mm.

Ohlins 5.4 rear spring. Thanks.


Glen, the measurements you gave for the fork springs for the new Zokes are a bit short, though you could space them up it would be over 25mm of spacers.

I have both fork and shock springs in stock for the Marzocchi 48 Shiver & Ohlins 888. I usually give good deals to ECEA racers, if you need them call the shop.

Happy trails.

-Evan @ SP
484.393.0095


Evan,

Really? I was told the 450-453mm length from the CC forks, not the 460mm from the OC forks by another tuner. Right now I'm 182lbs, doing TRX like a madman, so maybe less than 180 soon. Maybe I can get by with the stock springs? Give me a quote if you think I need to go up. I also will need the tool to remove the compression cap, as you know the KYB one won't fit over the PFP knob. I could make one by milling out the center of a KYB tool I have and welding it to a socket, but I'd rather buy one if its reasonable. Thanks.
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • This topic is locked

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users