WTB - fork and shock springs - East Coast Enduro Association

WTB - fork and shock springs .44 kg/mm 48mm KYB / 5.4 Ohlins

#1 Glenn Plokhoy

Junior Member

Group: ECEA Member
Posts: 118
Joined: 02-September 01
Gender:Male

Posted 28 February 2012 - 10:49 PM

I need the springs for the 48mm CC fork like on the YZ/YZF, 44mm x 450mm.

Ohlins 5.4 rear spring. Thanks.

#2 Bobby Kitchen

Board VIP

Group: Valley Forge Trail Riders
Posts: 152
Joined: 07-January 10
Gender:Male

Posted 01 March 2012 - 07:23 AM

Glenn Plokhoy, on 28 February 2012 - 10:49 PM, said:

I need the springs for the 48mm CC fork like on the YZ/YZF, 44mm x 450mm.

Ohlins 5.4 rear spring. Thanks.

Glenn,
You should contact Evan Yarnall (484-593-0095) at Solid Performance. I don't want to speak for him but I'm sure he can help you in your search. I know he is a certified Ohlins dealer\rep with a fairly large inventory.

Thanks,
Bobby

#3 Glenn Plokhoy

Junior Member

Group: ECEA Member
Posts: 118
Joined: 02-September 01
Gender:Male

Posted 01 March 2012 - 02:05 PM

Bobby,

Yeah I'm sure Evan could get me new springs, I could get them from a number of sources. Just looking to see if anyone here has something on a shelf somewhere before I pop for new stuff. These will be for my '12 GasGas EC250R when it arrives soon. The new Marzocchi 48 CC fork uses the KYB springs.

Glenn

#4 Mike Soudas

Senior Member

Group: Admin
Posts: 3,390
Joined: 27-August 01
Gender:Male
Location:Dupont, Pa
Interests:Motorcycles, Engineering, Auto Painting, ECEA

Posted 01 March 2012 - 02:50 PM

I have a set of 4.5 from the 50mm zookes that come on a TM, they are 15mm in length difference but the 50's have staggered internal preload and factory came this way.. We have another set coming on Monday but unsure of the rate..?
also I have a 5.0 rear ohlins or YZ and either a 5.4 or 5.6 coming in on Saturday.

#5 Evan Yarnall

Board Charter Member

Group: Valley Forge Trail Riders
Posts: 63
Joined: 06-June 08
Gender:Male
Location:West Chester, PA

Posted 05 March 2012 - 09:14 PM

Glenn Plokhoy, on 28 February 2012 - 10:49 PM, said:

I need the springs for the 48mm CC fork like on the YZ/YZF, 44mm x 450mm.

Ohlins 5.4 rear spring. Thanks.

Glen, the measurements you gave for the fork springs for the new Zokes are a bit short, though you could space them up it would be over 25mm of spacers.

I have both fork and shock springs in stock for the Marzocchi 48 Shiver & Ohlins 888. I usually give good deals to ECEA racers, if you need them call the shop.

Happy trails.

-Evan @ SP
484.393.0095

#6 Glenn Plokhoy

Junior Member

Group: ECEA Member
Posts: 118
Joined: 02-September 01
Gender:Male

Posted 05 March 2012 - 11:03 PM

Evan Yarnall, on 05 March 2012 - 09:14 PM, said:

Glenn Plokhoy, on 28 February 2012 - 10:49 PM, said:

I need the springs for the 48mm CC fork like on the YZ/YZF, 44mm x 450mm.

Ohlins 5.4 rear spring. Thanks.

Evan,

Really? I was told the 450-453mm length from the CC forks, not the 460mm from the OC forks by another tuner. Right now I'm 182lbs, doing TRX like a madman, so maybe less than 180 soon. Maybe I can get by with the stock springs? Give me a quote if you think I need to go up. I also will need the tool to remove the compression cap, as you know the KYB one won't fit over the PFP knob. I could make one by milling out the center of a KYB tool I have and welding it to a socket, but I'd rather buy one if its reasonable. Thanks.