Page 1 of 1
ktm rfs stator needed exc or any w/lighting coil
#1
Posted 02 May 2012 - 04:28 AM
I'm looking for the stator for an exc 450/520 with a good ign winding that has the lighting side too. I plan to re-wire the lighting as long as it has enough posts.. I'm hoping someone has one they took off to put on a trail tech or even a trail tech they don't need.. I'll be out in state college on thursday and jersey somewhere on friday I believe.. and the lansdale/montgomery pa area saturday..
Please email me at cruiser1911@me.com
Thanks,,
Please email me at cruiser1911@me.com
Thanks,,
#2
Posted 02 May 2012 - 05:33 AM
Steven Cruise said:
1335950910[/url]' post='115161']
I'm looking for the stator for an exc 450/520 with a good ign winding that has the lighting side too. I plan to re-wire the lighting as long as it has enough posts.. I'm hoping someone has one they took off to put on a trail tech or even a trail tech they don't need.. I'll be out in state college on thursday and jersey somewhere on friday I believe.. and the lansdale/montgomery pa area saturday..
Please email me at cruiser1911@me.com
Thanks,,
I'm looking for the stator for an exc 450/520 with a good ign winding that has the lighting side too. I plan to re-wire the lighting as long as it has enough posts.. I'm hoping someone has one they took off to put on a trail tech or even a trail tech they don't need.. I'll be out in state college on thursday and jersey somewhere on friday I believe.. and the lansdale/montgomery pa area saturday..
Please email me at cruiser1911@me.com
Thanks,,
#5
Posted 02 May 2012 - 08:03 PM
. Have 2 from 08' and 10' 450 xc-w. cannot read part number. But that's what they are for
#8
Posted 02 May 2012 - 09:11 PM
I'll check if any of my buddies are going.. I won't as bike is down.
#9
Posted 03 May 2012 - 04:30 AM
If that is all you need to ride - stator takes about 30 minutes or so.
#11
Posted 03 May 2012 - 06:55 AM
Cant seem to send a MSG on here from my phone. Can either of you email me at cruiser1911@me.com I get that on my iPhone. I'm driving out to lock haven now on a service call. Not sure now where my call will be tomorrow but to use a stock stator I have to change up some stuff on the bike as it was converted to DC.
Thanks!
Steve
Thanks!
Steve
#12
Posted 06 May 2012 - 07:08 AM
Thanks Guys!! Rob helped me out! Thanks for the offer Tim but logistics worked out as Rob was closer.. I do appreciate the offer and owe both of you guys a beer or two! Next event I actually make it two I'll bring both of you guys a six pack each..Thanks again!!
Share this topic:
Page 1 of 1

Help











