East Coast Enduro Association: Scotts Steering Damper Frame Mounts & 1 Bar Clamps - East Coast Enduro Association

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Scotts Steering Damper Frame Mounts & 1 Bar Clamps Kawasaki KXF, Yamaha YZ WR YZF KTM Suzuki RM RMZ DRZ

#1 User is offline   Mike Sigety 

  • Senior Member
  • PipPipPipPipPipPipPipPip
  • Group: ECEA - Club Member
  • Posts: 1,288
  • Joined: 29-August 01

Posted 07 June 2012 - 01:46 PM

Various scotts frame mounts and 1 piece bar clamps

Frame Mounts $50 Bar clamps $25, prices are less 1/2 reatil (if not less than 1/2), but if it is not for your model, please let me know.


7365 Fits 06-09 YZ250F
06-07 YZ450F
07-12 WR250F
07-11 WR450F

5962 07-10 KTM SX 125-up and 08-10 KTM 125-530 all models

6760 – 06-08 KXF250
5960 – 91-01 RM250, 93-03 RM125, 09-11 DRZ400 (not SM version)
6260 – 97-06 YZ/WR bikes, not YZ85






Bar Mounts

904041 00-12 KTM’s 125-530 with stock CAST alum triple clamp in #3 position and 1 1/8 bars
904030 older ktm - depends on model
984032 same as below but with 6mm 1 1/8 perch instead
984029 05-12 KXF 250 w 3mm 1 1/8 perch on stock triple clamp/ 06-11 w 3mm 1 1/8 perch on stock triple clamp/ ’12 KXF 450 w 6mm perch on stock triple clamp #2 position
904034 older ktm depends on model
903539 00-02 KTM’s 125-520 w stock cast triple clamp #3 position and 7/8 bars. Also 03-12 KTM 85/105 #3 position
1003232 steel frame Yamaha big bikes with stock triple clamp, 7/8 bars from 01-06 DOES NOT FIT 1 1/8 bars
0

#2 User is offline   Mike Sigety 

  • Senior Member
  • PipPipPipPipPipPipPipPip
  • Group: ECEA - Club Member
  • Posts: 1,288
  • Joined: 29-August 01

Posted 13 July 2012 - 12:13 AM

Bump
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users