Here's what I have
FMF Gnarly, Barkbusters, Skid plate, Scotts Damper Mounts, 1.8 rad cap, Evans waterless coolant, Motul Red Cap in the brake lines

Here's what I needed. I doesn't have to be new or shiny but needs to be solid and working, no junk please
> Tall med/soft foam seat (EE) in good shape no tears
> IMS Clear Tank
> Pipe Guard, FMF Gnarly
> Graphics (front, rear fenders, swing arm, etc.)
> Radiator Guards
> Scotts Damper (just the damper I have the mounts)
> BRP Chain guide
> Springs
> Fork: 0.47 kg/mm, 4351046, 4351048
> Shock: 8.8 kg/mm, PDS 8 MXT 63mm x 260mm x 8.1kgmm - 9.95kgmm

Please PM me what ya got and please feel free to recommend any other goodies I may need to complete the setup for this bike.

Dealers are welcome to contact me with your best prices.

Any other setup tips, must haves, etc. whould be appreciated. This is my first KTM.

Jetting, what's everyone running for jetting (spring, summer, fall)?

What's the best brake pads to run?

Any tips for making the bike lighter or feel lighter?

Hey, I run the Stock KTM Sintered Break Pads, The work well for me but others prefer there own brands.
I have some spare parts around you may be interested in.
A new Shifter
Front Number Plate
Front Fender
Air Screw Bleeders
STOCK Carbon Fiber pipe guard
Stock Silencer
Used Stock Pipe as well, some dents in it

Email me at ktmracing323@yahoo.com if you are interested in this or need something else. I may have it laying around.

I have a WP 88-250 shock spring and stock 07 250 XCF-W fork springs.

200/250/300 ?

It's a 250

Rob,
I have a IMS tank. I think it is 3.2 gal? no petcock.
I bought it and never used it. Its in really good shape. Let me know if that is what you are looking for.
Carl

Hey Rob, I hope your enjoying the bike!

I see you are dialing her in for yourself, that's great.

I am in Guatemala right now and originaly suppose to ride here again, but it didn't work out this time.

I met a bunch of guys today that where on KTM 2 & 4 strokesan we talked for a few.

I have a EE Tall Soft Seat that is in Great Shape, no tears or holes and a brand new set of Devol Radiator Guards still in the bag that where never openned.

PM me and we can talk.

I wll be home late Saturday night, s if you need this Sunday, I am around.

Merry Christmas and Happy New Year.

Regards,

Scott

P.S. The IMS Tank will give it a lighter feel because of the lower center or gravityM

Hey Rob, I will sell you the EE Tall Soft Seat that is ready to bolt on and the new Devol Guards for a $130, sound good.

Let me know what day you want to stop by.

Scott

I have 2 used IMS natural tanks for 05 to 07 KTM 2 stks. $50 & $75. One is less discolored from fuel.

2 piece TM designs chain guide and slide (rear guide and front swing arm slide), orange. Used, but still has life. $50

Can bring to ECEA banquet.



I use EBC "x" red rear pads and a solid rotor. I would suggest getting the susp. revalved, Factory Connection does mine.

Rob, Appalachian KTM aka www.ktm-parts.com has KTM hardparts tall seats and radiator guards on closeout specials - ktm brand tall soft seats for 04-06 models are $32.95. Register on the site for an across the board additional 10% off. Yes, $29 for a new KTM logo seat. Radiator braces for $30 - 10%. I can share some jetting and tuning baselines if you need them. I am with Ron regarding the 368X carbon rear brakes, but buy a spare set - wet sand and mud will eat them. Please let me know if you decide to pass on the tanks that have been offered.

www.ktm-parts.com/mm5/merchant.mvc?Screen=PROD&Store_Code=K&Product_Code=U6954999&Category_Code=COPARTS

Dan,
GREAT find on the seats, I'm ordering one. Thanks.

I have a ton of KTM WP48 fork springs, all rates from .40 to .48
PM me if you still need the set of .47's

Thanks!

looking for low mounting foot pegs